Xi'an Hani New Energy and Technology Co.,Ltd
0086 29 8536 7200 sales@hanrm.com

Products

Knowledge
Home > Industry News > Content

Functions of Fly Shear Machine

Source: | Updated: Feb 28, 2017

Functions of Fly Shear Machine:

1. Plc is controlling all the logical operations.

2. Rollers are running through DC servo motor.

3. Rollers are pushing wire as a cutting material in forwarding direction.

4. Shaft Encoder is attached with dc motor which counts the length of the wire

5. The movement of cutter is done through AC induction motor.

6. The Induction motor is attached vertically to screw spindle and the weight of motor used as a load on the cutter.

7. Limit switches sense the movement of cutter

Flying shears are used for cutting applications, where the endless material to be cut to length cannot be stopped during the cutting process and the cut must be effected “on the fly”. The mechanical construction provides a saw or shear system mounted on a carriage, that follows the material with synchronous speed while cutting is in progress, and then returns to a home position to wait for the next cut. The flying shear control is based on a PLC. The system has been designed for the special requirements of flying shears under consideration of maximum efficiency and accuracy at minimum stress for all mechanical parts. 

If you are interested in any of our products, pls feel free to contact sales@hanrm.com


flying shear.jpg


Feedback
Contact Us
Address: NO.67, Gaoxin Road, Xi'an 710075, Shaanxi P.R. China
Tel: 0086 29 8536 7200
Fax: 0086 29 8536 7200
E-mail:inquiry@hanrm.com
Home | Products | About Us | Technology | Industry News | Contact Us | Mobile | XML