Xi'an Hani New Energy and Technology Co.,Ltd
0086 29 8536 7200 sales@hanrm.com

Products

Knowledge
Home > Industry News > Content

Shearing Machine in Steel-making Industry(two)

Source: | Updated: Apr 14, 2017

The blades that are on the shearing machine should be of a higher-quality metal shearing machine.jpgbased on the quality and thickness of the sheared material. For a better metal cutting, the blades need to be harder than the material being cut. However, this rule doesn't always apply to all shearing machine, especially industrial shearing machine. Because the cut is very fast and the pressure is extremely high, steel can often be cut by steel easily. Still, special steel or carbide alloys are adopted by some machines as their blades.

Lots of shearing machines cut sheet metalsome also cut other metal forms. Metal bars is the most common metal behind sheets. Because these bars are usually very long, they would be cut into more manageable lengths by the shearing machine for use in other machines. Other machines aims at closely-finished parts; they cut edges to remove unwanted products or stop the trouble from earlier manufacturing processes, like chopping shear behind the track switch. Gripping shear applies the same principle, which is to protect the pre-finishing mill and finishing mill by cutting off the rolled piece and stop further feeding into the mill once there is an operation failure.

If you are interested in any of our products, pls feel free to contact sales@hanrm.com



Feedback
Contact Us
Address: NO.67, Gaoxin Road, Xi'an 710075, Shaanxi P.R. China
Tel: 0086 29 8536 7200
Fax: 0086 29 8536 7200
E-mail:inquiry@hanrm.com
Home | Products | About Us | Technology | Industry News | Contact Us | Mobile | XML