Xi'an Hani New Energy and Technology Co.,Ltd
0086 29 8536 7200 sales@hanrm.com

Products

Knowledge
Home > Industry News > Content

Wire Rod Rolling Process Analysis

Source: | Updated: Jun 15, 2016

According to the rolling speed, there two types of wire rod rolling mills, one is normal rolling mill, the other one is high speed rolling mill, compare with the normal rolling mill, the high speed rolling mill requires higher technology for sure, about the wire rod rolling, there are some matters you have to pay attention to, the wire rod has the following characteristics, small cut surface, very long, requires high accuracy and surface quality, the main rolling process are:   

Billet:

The wire rod billets are mainly continues small billet, around 120-150mm, length is 6-12m, during the operation field, visual inspection, Electromagnetic induction detection, ultrasonic flaw detection, etc, those method are often used to detect the quality of billet.   

Heating:

Normally use walking beam furnace, the heating with less oxidation and decarburization, the billet would not likely to be twisted, the billet of modern high speed rolling mill, are big and long, this requires a very even heating temperature.    

Rolling:

The rolling mill should be very accuracy because the cutting surface of wire rod is sole, it’s a very long process and distance from the billet to final product, more rolling mill stands are required, normally needs 21-28 stands, divided in to roughing mill, intermediate mill, finishing mill,  high speed rolling mill can reach speed higher than 100m/s. 

Cooling:

The rolling speed right now is very high, which makes the temperature is high and not easy to cool down, to ensure the quality of final product, loosen coil is normal used for cooling, according to the certain usage of final product, normally people Pearlite controlled cooling and Martensite controlled cooling.

There are more quality requirement for wire rod, including, surface, accuracy, chemical, mechanical, coil weight, package and marks.


wire rod mill process


Feedback
Contact Us
Address: NO.67, Gaoxin Road, Xi'an 710075, Shaanxi P.R. China
Tel: 0086 29 8536 7200
Fax: 0086 29 8536 7200
E-mail:inquiry@hanrm.com
Home | Products | About Us | Technology | Industry News | Contact Us | Mobile | XML